LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Engine - 4.2L -- F150 Pickup) >> In-Vehicle Repair >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the crankshaft damper and the engine front cover for damage that may cause the crankshaft front seal to fail.
    2. NOTE: Lubricate the crankshaft front seal with clean engine oil.
    Fig 1: Using Special Tools To Install Crankshaft Front Seal
    G03962012Courtesy of FORD MOTOR CO.
  2. Using the special tools, install the crankshaft front seal.
  3. Install the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY .
scientia non olet · About LEMON Manuals