LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 976 (Front Suspension - Four Wheel Drive (4WD) -- F150) >> Removal And Installation >> Ball Joint - Lower >> Removal

Ball Joint - Lower: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel knuckle. For additional information, refer to Wheel Knuckle .
  2. Remove and discard the lower ball joint snap ring.
  3. Using the special tools, remove the lower ball joint.
    Fig 1: Identifying Special Tools
    G04669689Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals