Front Suspension

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not lubricate the stabilizer bar bushings for any reason.

The suspension system consists of the following components:

Front suspension
- Upper control arm
- Lower control arm
- Shock absorber and spring assembly
- Stabilizer bar, links, and bushings
- Wheel bearing, hub, and knuckle
- Wheel and tire assembly

The front caster, camber and splits are adjusted by loosening the lower control arm-to-frame mounting bolts and installing the alignment kit to allow the arm to be adjusted in the frame slots. Front toe is adjusted by adjusting the front wheel knuckle tie-rod.