LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 974 (Automatic Transmission -- F150 Pickup) >> Diagnosis And Testing >> Output State Control (OSC) Mode >> Output State Control (OSC) Procedures

Output State Control (OSC) Procedures

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Retrieve the continuous codes, carry out a KOEO and KOER On-Demand Self Test before using OSC. Any Diagnostic Trouble Codes (DTCs) related to the transmission range (TR) sensor or the output shaft speed (OSS) sensor must be fixed or the PCM will not allow OSC to operate.

Using the NGS, OSC has 2 menus for operation, the BENCH MODE and the DRIVE MODE.