LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 973 (Engine - 5.4L (3V) - F150 Pickup) >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the engine cooling fan shroud. For additional information, refer to ENGINE COOLING .
  3. Rotate the tensioner clockwise and remove the accessory drive belt.
    Fig 1: Rotating Tensioner Clockwise And Removing Accessory Drive Belt
    G03886148Courtesy of FORD MOTOR CO.
  4. Remove the crankshaft pulley bolt and washer.
    • Discard the crankshaft pulley bolt.
  5. Using the special tool, remove the crankshaft pulley.
    Fig 2: Using Special Tool To Remove Crankshaft Pulley
    G03919906Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals