LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 972 (Engine - 4.6L (2V) - F150 Pickup) >> In-Vehicle Repair >> Hydraulic Lash Adjuster >> Installation

Hydraulic Lash Adjuster: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the hydraulic lash adjusters with clean engine oil prior to installation.
    Fig 1: Installing Hydraulic Lash Adjusters In Their Original Locations
    G04583838Courtesy of FORD MOTOR CO.
  1. Install the hydraulic lash adjusters in their original locations.
  2. Install the camshaft roller followers. For additional information, refer to CAMSHAFT ROLLER FOLLOWER .
scientia non olet · About LEMON Manuals