LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 972 (Engine - 4.6L (2V) - F150 Pickup) >> In-Vehicle Repair >> Exhaust Manifold - LH >> Removal

Exhaust Manifold - LH: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the LH inner fenderwell. For additional information, refer to FRONT END BODY PANELS .
  3. Remove the 2 exhaust Y-pipe flange nuts and position the exhaust Y-pipe flange aside.
  4. Remove the exhaust gas recirculation (EGR) system module-to-exhaust manifold tube.
  5. Remove the 8 exhaust manifold nuts.
  6. Remove the LH exhaust manifold and discard the gasket.
  7. Inspect the exhaust manifold. For additional information, refer to EXHAUST SYSTEM -- F150 PICKUP .
scientia non olet · About LEMON Manuals