LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 970 (Driveline System - General Information -- F150) >> Diagnosis And Testing >> Driveline System >> Analysis of Vibration >> Driveline Imbalance

Driveline Imbalance

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Driveline imbalance can be caused by excessive looseness in the driveshaft, damaged driveshaft tubing, looseness or high runout at the driveshaft attachments (axle and transfer case flanges).

Excessive looseness in the driveshaft can be caused by CV joint or universal joint wear as well as loose-fitting slip-yoke splines. Inspect and install new driveshaft and halfshaft components as necessary. For additional information, refer to DRIVESHAFT or FRONT DRIVE HALFSHAFTS .

scientia non olet · About LEMON Manuals