General Specifications
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricants and Sealants | |
| Premium Long-Life Grease XG-1-C | ESA-M1C75-B |
| Stud and Bearing Mount TA-27 | WSK-M2G349-A1 |
| Threadlock and Sealer TA-25 | WSK-M2G351-A5 |
| Silicone Gasket and Sealant F7AZ-19554-EA | WSE-M4G323-A4 |
| Specifications | |
| Backlash between ring gear and pinion teeth | 0.203-0.304 mm (0.008-0.012 in) |
| Ring gear maximum variation between teeth | 0.102 mm (0.004 in) |
| Differential case maximum runout | 0.076 mm (0.003 in) |
| Pinion bearing preload | 1.8-3.3 Nm (16-29 lb-in) |
| Available drive pinion bearing adjustment shim in steps of 0.25 mm (0.010 in) | 0.254 mm (0.010 in) -0.965 mm (0.038 in) |