General Specifications
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Pads | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) |
| Brake pad maximum thickness variation (pad-to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake Disc | |
| Disc minimum thickness | 18.5 mm (0.72 inch) |
| Minimum thickness to machine front brake disc | 29.1 mm (1.14 inch) |
| Minimum thickness to machine rear brake disc | 19.1 mm (0.75 inch) |
| Parking brake cage clearance | |
| Cage clearance | 0.6 mm (0.02 in) |
| Lubricant | |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) | ESA-M6C25-A |
| High Temperature Nickel ESE-M12A4-A Anti-Seize Lubricant XL-2 (Canada CXG-2-B) | ESE-M12A4-A |
| Silicone Brake Caliper ESE-M1C171-A Grease and Dielectric Compound XG-3-A | ESE-MIC171-A |
| Brake Parts Cleaner PM-4 | - |