LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (Rear Disc Brake System - F150 Pickup) >> Removal And Installation >> Rear Brake Caliper >> Installation

Rear Brake Caliper: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake caliper and install the 2 bolts.
    • Tighten to 30 Nm (22 lb-ft).
  2. Using 2 new copper washers, position the brake flexible hose on the brake caliper and install the flow bolt.
    • Tighten to 35 Nm (26 lb-ft).
  3. Bleed the brake system. For additional information, refer to BRAKE SYSTEM-GENERAL INFORMATION .
scientia non olet · About LEMON Manuals