LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 963 (Front Disc Brake System - F150 Pickup) >> Removal And Installation >> Front Disc Brake Shield >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc. For additional information, refer to BRAKE DISC - 4X2  or BRAKE DISC - 4X4 .
  2. Remove the 3 brake disc shield bolts and the brake disc shield.
    • To install, tighten to 12 Nm (9 lb-ft).
  3. To install, reverse the removal procedure.