LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 963 (Front Disc Brake System - F150 Pickup) >> Removal And Installation >> Front Disc Brake - 4x4 >> Installation

Front Disc Brake - 4x4: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any rust or foreign material from the brake disc and wheel hub.
    • Use parts cleaner to clean the front brake disc and hub surfaces.
  2. Apply a thin coat of anti-seize lubricant to the hub flange.
  3. Install the brake disc on the wheel hub.
  4. Position the brake caliper and anchor plate assembly on the wheel knuckle and install 2 new bolts.
    • Tighten to 200 Nm (148 lb-ft).
scientia non olet · About LEMON Manuals