LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 963 (Front Disc Brake System - F150 Pickup) >> Removal And Installation >> Front Disc Brake - 4x2 >> Removal

Front Disc Brake - 4x2: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Do not allow the brake caliper and anchor plate assembly to hang from the brake flexible hose. Support the brake caliper and anchor plate assembly.
  1. Remove and discard the 2 caliper anchor plate bolts and position the brake caliper and anchor plate assembly aside.
  2. Remove and discard the cotter pin from the spindle nut retainer.
  3. Remove the spindle nut retainer and the nut.
  4. Remove the front brake disc from the spindle.
scientia non olet · About LEMON Manuals