LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 963 (Front Disc Brake System - F150 Pickup) >> Removal And Installation >> Front Disc Brake - 4x2 >> Installation

Front Disc Brake - 4x2: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake disc on the spindle.
    2. NOTE: Tighten the spindle nut to the specified torque. Rotate the disc counterclockwise 5 rotations and then recheck the torque.
  2. Install the spindle nut.
    • Tighten to 400 Nm (295 lb-ft).
  3. Position the brake caliper and anchor plate assembly and install 2 new bolts.
    • Tighten to 200 Nm (148 lb-ft).
scientia non olet · About LEMON Manuals