LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 963 (Front Disc Brake System - F150 Pickup) >> Removal And Installation >> Front Brake Pads >> Installation

Front Brake Pads: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: One brake disc pad kit contains the pads required for both the RH and LH side.
  1. Install the new spring clips and brake pads.
    2. NOTE: Protect the pistons and boots when compressing the piston into its bore.
  2. Using a suitable tool, compress the disc brake caliper pistons into the brake caliper bore.
    3. NOTE: Tighten the lower caliper bolt first.
  3. Position the brake caliper on the brake caliper anchor plate and install the 2 bolts.
    • Tighten to 64 Nm (47 lb-ft).
scientia non olet · About LEMON Manuals