LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Engine Controls - Self-Diagnostics) >> System Tests >> Test DS: Crankshaft Position Sensor >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

Perform this test only when directed by QUICK TEST. This test is intended to diagnose the following:

For DTC P0335, CKP sensor resistance should be 106.5-203.5 ohms at 68°F (20°C).

For DTC P1336, inspect flywheel for chipped or damaged teeth.

Fig 1: Identifying Crankshaft Position Sensor Test Circuits
G99E02355Courtesy of FORD MOTOR CO.