LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Safety Belt System -- F250-F550 Super Duty) >> Removal And Installation >> Safety Belt Buckle - Front, Bench Seat >> Removal

Safety Belt Buckle - Front, Bench Seat: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the utility tray, if necessary.
  2. Disconnect and detach the driver safety belt warning indicator connector.
    Fig 1: Locating Driver Safety Belt Warning Indicator Connector
    G03926147Courtesy of FORD MOTOR CO.
  3. Remove the bolt and the LH safety belt buckle.
    Fig 2: Locating Safety Belt Buckle Bolt
    G03926148Courtesy of FORD MOTOR CO.
  4. Remove the bolts and the RH and center safety belt buckle assembly.
    Fig 3: Locating Center Safety Belt Buckle Assembly Bolts
    G03926164Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals