LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat Latch - SuperCab, Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The 40 percent seat is shown. The 60 percent seat is similar.
  1. Remove the seat. For additional information, refer to REAR SEAT - SUPERCAB  in this article.
  2. Remove the bolts.
    Fig 1: Removing Bolts - With Torque Specifications
    G03925581Courtesy of FORD MOTOR CO.
  3. Remove the bolt, and remove latch shield.
    Fig 2: Removing Bolt And Latch Shield - With Torque Specifications
    G03925582Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals