Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: 60 percent seat is shown, 40 percent seat is similar.

Remove the seat. For additional information, refer to REAR SEAT BACKREST - SUPERCAB in this article.
Remove the bolts.

Fig 1: Removing Bolts - With Torque Specifications
Courtesy of FORD MOTOR CO.
Remove latch shield and the bolt.

Fig 2: Removing Latch Shield And Bolt - With Torque Specifications
Courtesy of FORD MOTOR CO.
Separate the seat cushion from the center seat mount.

Fig 3: Separating Seat Cushion From Center Seat Mount
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.