LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Rear Seat Backrest - Bench, Crew Cab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat. For additional information, refer to REAR SEAT - BENCH, CREW CAB  in this article.
  2. Separate the seat cover J-clip.
    Fig 1: Separating Seat Cover J-Clip
    G03925515Courtesy of FORD MOTOR CO.
  3. Pull the seat covering to access the seat back retaining bolts.
    Fig 2: Pulling Seat Covering To Access Seat Back Retaining Bolts
    G03925516Courtesy of FORD MOTOR CO.
  4. Remove the seat back bolts.
    Fig 3: Removing Seat Back Bolts - With Torque Specifications
    G03925517Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals