LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Seat System -- F250-F550 Super Duty) >> Disassembly And Assembly >> Front Seat Cushion - 20 Percent >> Assembly

Front Seat Cushion - 20 Percent: Assembly

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat cushion foam pad on the pan. Fasten the J-clips.
    Fig 1: Positioning Seat Cushion Foam Pad On Pan
    G03911498Courtesy of FORD MOTOR CO.
    2. NOTE: LH shown, RH similar.
    Fig 2: Installing RH And LH Seat Riser Retaining Bolts - With Torque Specifications
    G03911500Courtesy of FORD MOTOR CO.
  2. Install the RH and LH seat riser retaining bolts.
  3. Install the LH seat back bracket bolts.
    Fig 3: Installing LH Seat Back Bracket Bolts - With Torque Specifications
    G03911501Courtesy of FORD MOTOR CO.
  4. Install the seat latch. For additional information, refer to SEAT LATCH - 20 PERCENT  in this article.
  5. Install the seat backrest. For additional information, refer to FRONT SEAT BACKREST - 20 PERCENT  in this article.
  6. Install the front seat. For additional information, refer to FRONT SEAT - 20 PERCENT  in this article.
  7. Install the front seats. For additional information, refer to FRONT SEAT - WITH SEAT INTEGRATED RESTRAINTS (SIR)  or FRONT SEAT - CAPTAIN'S CHAIR AND 40 PERCENT  in this article.
scientia non olet · About LEMON Manuals