LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 942 (HVAC System - Control Components -- F250-F550 Super Duty) >> Removal And Installation >> Vacuum Reservoir Tank and Bracket >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the nuts.
    Fig 1: Removing Nuts
    G03910652Courtesy of FORD MOTOR CO.
  2. Disconnect the vacuum hoses and remove the A/C vacuum reservoir tank and bracket (5.4L and 6.8L engines).
    Fig 2: Disconnecting Vacuum Hoses And Removing A/C Vacuum Reservoir Tank And Bracket (5.4L And 6.8L Engines)
    G03910653Courtesy of FORD MOTOR CO.
  3. Disconnect the vacuum hoses and remove the A/C vacuum reservoir tank and bracket (19A566) (6.0L diesel engine).
    Fig 3: Disconnecting Vacuum Hoses And Removing A/C Vacuum Reservoir Tank And Bracket (19A566) (6.0L Diesel Engine)
    G03910418Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.