LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Engine Controls - System & Component Tests - EEC-V - NGV) >> Introduction >> Engine Cover >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford Econoline, 2002 Ford Cutaway, and 2002 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

On models with console, open storage bin and press clips to remove storage bin. Press and hold lock clip and slide console up to remove. On all models, remove instrument panel cover under steering column. Disconnect 4 engine cover latches and remove engine cover. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals