LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Fuel System - General Information -- F250-F550 Super Duty) >> General Procedures >> Quick Connect Coupling Retainer Clip >> Removal

Quick Connect Coupling Retainer Clip: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the tool that is supplied with the new replacement retainer clip into the quick connect coupling body until it engages and spreads the retainer legs.
    Fig 1: Inserting Tool Into Quick Connect Coupling Body
    G03883093Courtesy of FORD MOTOR CO.
  2. Grasp the retainer clip under the lip on each side, pull outward and remove while simultaneously removing the tool from the quick connect coupling body.
    • The legs of the retainer clip may catch on the quick connect coupling body just prior to removal and you may need to open the legs of the retainer clip slightly to complete removal.
      Fig 2: Removing Tool From Quick Connect Coupling Body
      G03883094Courtesy of FORD MOTOR CO.
  3. Discard the quick connect coupling retainer clip.
scientia non olet · About LEMON Manuals