LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 927 (Supplemental Inflatable Restraint System -- F250-F550 Super Duty) >> Removal And Installation >> Passenger Air Bag Deactivation (PAD) Switch >> Installation

Passenger Air Bag Deactivation (PAD) Switch: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the PAD switch.
    1. Position the PAD switch to the instrument panel finish panel.
    2. Install the screws.
      Fig 1: Installing Passenger Air Bag Deactivation (PAD) Switch
      G03926300Courtesy of FORD MOTOR CO.
  2. Install the instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  3. Repower the system. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING  in this article.