LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 923 (Brake System - Auxiliary Brake System -- F250-F550 Super Duty) >> Diagnosis And Testing >> Auxiliary Brake System - Trailer Brake Control (TBC) Module >> Pinpoint Test G: The Trailer Brakes Are Always Engaged >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The braking energy that is provided to the trailer is varied with a pulse width modulated (PWM) signal that switches between 0 volt and battery voltage, according to the TBC gain setting, the higher the duty cycle the more braking power available. On vehicles built before March 23rd, 2005  , with the vehicle stationary and with the manual slider switch fully to the left with a gain of 10, there should be greater than 1--2 volts supplied to trailer tow C4099-3, circuit 43 (DB). On vehicles built March 23rd, 2005 and later  , with the vehicle stationary and with the manual slider switch fully to the left with a gain of 10, there should be greater than 10--12 volts supplied to trailer tow C4099-3, circuit 43 (DB).