LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 905 (Automatic Transmission External Controls -- F250-F550 Super Duty) >> Diagnosis And Testing >> External Controls >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the transmission external control.
  2. Visually inspect for obvious signs of mechanical and electrical damage; refer to the following chart:
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Damaged brake shift interlock actuator
    • Failed fuse(s)
    • Damaged wiring harness
    • Damaged transmission control switch (TCS)
    • Loose or corroded connections
  3. If the fault is not visually evident, determine the symptom. GO to SYMPTOM CHART .