LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 900 (Automatic Transmission -- F250-F550 Super Duty) >> In-Vehicle Repair >> Transmission Filler Tube >> Removal

Transmission Filler Tube: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fluid level indicator.
    Fig 1: Removing Fluid Level Indicator
    G03889043Courtesy of FORD MOTOR CO.
  2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  3. Remove the transmission fluid fill tube nut.
    Fig 2: Removing Transmission Fluid Fill Tube Nut
    G03886397Courtesy of FORD MOTOR CO.
  4. Remove the transmission fluid filler tube.
    Fig 3: Removing Transmission Fluid Filler Tube
    G03889045Courtesy of FORD MOTOR CO.
  5. Inspect the O-ring seal for damage.
    Fig 4: Inspecting O-Ring Seal
    G03889046Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals