LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 900 (Automatic Transmission -- F250-F550 Super Duty) >> In-Vehicle Repair >> Transmission Filler Tube >> Installation

Transmission Filler Tube: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new O-ring if damaged.
    Fig 1: Installing O-Ring
    G03889046Courtesy of FORD MOTOR CO.
    2. NOTE: Coat the O-ring at the bottom of the transmission fluid filler tube with transmission fluid.
    Fig 2: Installing Transmission Fluid Filler Tube
    G03889048Courtesy of FORD MOTOR CO.
  2. Install the transmission fluid filler tube.
  3. Install the transmission fluid filler tube nut.
    Fig 3: Installing Transmission Fluid Filler Tube Nut
    G03886414Courtesy of FORD MOTOR CO.
  4. Install the fluid level indicator.
    Fig 4: Installing Fluid Level Indicator
    G03889043Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals