LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 900 (Automatic Transmission -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Input Shell Assembly >> Check

Input Shell Assembly: Check

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the forward/reverse sun gear and input shell assembly. Check the sun gear teeth, lug teeth and thrust surface for damage. If any evidence of damage is found, a new input shell assembly must be installed.
    Fig 1: Inspecting Forward/Reverse Sun Gear And Input Shell Assembly
    G03889472Courtesy of FORD MOTOR CO.
  2. Inspect the front bushing for damage. If any damage is found a new input shell assembly must be installed.
    Fig 2: Inspecting Front Bushing
    G03889473Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals