LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 900 (Automatic Transmission -- F250-F550 Super Duty) >> Diagnosis And Testing >> Pinpoint Tests - OSC Equipped Vehicle >> Notes

Pinpoint Tests - OSC Equipped Vehicle: Notes

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS

G03908801
 Transmission Fluid Pressure Gauge 307-004 (T57L-77820-A)
G03879062
 Automotive Meter 73 III 105-R0057 or equivalent
G03878958
 Worldwide Diagnostic System (WDS) Vehicle Communication Module (VCM) and appropriate adapters, or equivalent diagnostic tool
NOTE: If equipped, turn the power take-off (PTO) unit off for correct test results. For a description of PTO operation, refer to TRANSMISSION ELECTRONIC CONTROL SYSTEM . On-Board Diagnostic is not accessible when the PTO unit is in operation. Shift solenoid B (SSB) is on when the PTO is in operation.

Any time an electrical connector or solenoid body is disconnected, inspect the connector for terminal condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.

scientia non olet · About LEMON Manuals