LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 900 (Automatic Transmission -- F250-F550 Super Duty) >> Diagnosis And Testing >> Output State Control (OSC) Mode >> OSC For Transmission - Service Bay Mode >> Notes

OSC For Transmission - Service Bay Mode: Notes

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The service bay mode is used to test various transmission components and functions when the vehicle is in the service bay. The service bay mode is used when carrying out electrical pinpoint tests and hydraulic pressure tests. Each OSC function has a unique set of vehicle operating requirements or vehicle states that the technician is required to meet before the powertrain control module (PCM) will allow the OSC to operate. The service bay mode is used in the following 3 vehicle states:

scientia non olet · About LEMON Manuals