LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 900 (Automatic Transmission -- F250-F550 Super Duty) >> Description And Operation >> GEARTRAIN >> Output Shaft

Output Shaft

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The output shaft is supported by a press fit radial bearing in the extension housing. It is positioned by a bushing in the forward clutch cylinder, which in turn is positioned by the case center support and the center shaft.

scientia non olet · About LEMON Manuals