LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 899 (Engine System-General Information -- F250-F550 Super Duty (Gasoline)) >> General Procedures >> Valve Spring Strength

Valve Spring Strength

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL

G03897663
 Pressure Gauge, Valve/Clutch Spring 303-006 (TOOL-6513-DD) or equivalent
  1. Use a Valve/Clutch Spring Pressure Gauge to check the valve spring for correct strength at the specified valve spring length.
    • Refer to the appropriate article for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate article for the procedure.
      Fig 1: Measuring Valve Spring Strength
      G03919823Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals