LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 899 (Engine System-General Information -- F250-F550 Super Duty (Gasoline)) >> General Procedures >> Camshaft Bearing Journal Clearance

Camshaft Bearing Journal Clearance

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The camshaft journals must meet specifications before checking camshaft journal clearance.
  1. Remove the camshaft bearing cap and lay Plastigage across the surface. Refer to the appropriate article for the procedure.
    2. NOTE: Do not turn the camshaft while carrying out this procedure.
    Fig 1: Measuring Plastigage Across Bearing Surface
    G04583327Courtesy of FORD MOTOR CO.
  2. Position the camshaft bearing cap and install the bolts. Refer to the appropriate article for the procedure.
  3. Use Plastigage to verify the camshaft journal clearance.
    • If out of specification, install new components as necessary. Refer to the appropriate article for the procedure.
scientia non olet · About LEMON Manuals