LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 899 (Engine System-General Information -- F250-F550 Super Duty (Gasoline)) >> General Procedures >> Bearing Inspection

Bearing Inspection

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect bearings for the following defects:
    1. Cratering - fatigue failure
    2. Spot polishing - incorrect seating
    3. Imbedded dirty engine oil
    4. Scratching - dirty engine oil
    5. Base exposed - poor lubrication
    6. Both edges worn - journal damaged
    7. One edge worn - journal tapered or bearing not seated
      Fig 1: Inspecting Bearings
      G03885074Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals