LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 898 (Engine - 6.0L Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Oil Pan - Upper >> Removal

Oil Pan - Upper: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to OIL PAN - LOWER .
  2. Remove the bolts and the upper oil pan.
    • Remove and discard the press-in-place gasket. Clean and inspect the sealing surfaces.
      Fig 1: Removing Bolts And Upper Oil Pan
      G03887278Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals