Torque Specifications

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATIONS

Description	Nm	lb-ft	lb-in
Camshaft position (CMP) sensor - 5.4L	10 Nm	-	89 lb-in
CMP sensor - 6.8L	10 Nm	-	89 lb-in
Crankshaft position (CKP) sensor	10 Nm	-	89 lb-in
A/C compressor bolts	25 Nm	18 lb-ft	-
Powertrain control module (PCM) bolts	7 Nm	-	62 lb-in
Throttle position (TP) sensor screws	3 Nm	-	27 lb-in
Fuel rail pressure and temperature sensor - 5.4L	6 Nm	-	53 lb-in
Fuel rail pressure and temperature sensor - 6.8L	6 Nm	-	53 lb-in
Variable camshaft timing (VCT) oil control solenoid - 5.4L	5 Nm	-	44 lb-in
Mass air flow (MAF) sensor bolts - 5.4L	3 Nm	-	27 lb-in
MAF sensor bolts - 6.8L	3 Nm	-	27 lb-in
Heated oxygen sensor (HO2S)	46 Nm	34 lb-ft	-
Catalyst monitor sensor	46 Nm	34 lb-ft	-
Knock sensor (KS) - 5.4L	20 Nm	15 lb-ft	-
KS - 6.8L	20 Nm	15 lb-ft	-
Cylinder head temperature (CHT) sensor	10 Nm	-	89 lb-in
Charge motion control valve (CMCV) - 5.4L	6 Nm	-	53 lb-in
Intake manifold runner control (IMRC) actuator - 6.8L	6 Nm	-	53 lb-in
Engine oil pressure (EOP) sensor - 5.4L	18 Nm	13 lb-ft	-
EOP sensor - 6.8L	18 Nm	13 lb-ft	-
Oil temperature sensor	15 Nm	11 lb-ft	-