Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the pulse vacuum hublock (PVH) solenoid.
1. Disconnect the harness connector.
2. Remove the vacuum hose connector.
  
  Fig 1: Disconnecting Pulse Vacuum Hublock (PVH) Solenoid
  Courtesy of FORD MOTOR CO.
Remove the bolts and the PVH solenoid.

Fig 2: Removing PVH Solenoid
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.