Differential Check - Tractech® Truetrac® (Dana)
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Shift the transmission into NEUTRAL.
- Raise and support the vehicle. For additional information, refer to JACKING AND LIFTING .
- Spin either rear wheel.
- Both wheels must spin with a fluid motion. Any feeling of gripping and release/roughness indicates that additional inspection of the axle assembly is necessary. For additional information about axle disassembly and inspection, refer to REAR DRIVE AXLE/DIFFERENTIAL - DANA 80 , REAR DRIVE AXLE/DIFFERENTIAL - DANA S110 AND S130 or REAR DRIVE AXLE/DIFFERENTIAL - FORD 10.50-INCH RING GEAR .
- Shift the transmission into gear.
- Spin either rear wheel.
- The other wheel must spin with a fluid motion in the opposite direction and at the same speed of the wheel being spun. Any feeling of gripping and release/roughness indicates that further inspection of the axle assembly is necessary. For additional information about axle disassembly and inspection, refer to REAR DRIVE AXLE/DIFFERENTIAL - DANA 80 , REAR DRIVE AXLE/DIFFERENTIAL - DANA S110 AND S130 or REAR DRIVE AXLE/DIFFERENTIAL - FORD 10.50-INCH RING GEAR .