LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Front Drive Axle/Differential -- F250-F550 Super Duty) >> General Procedures >> Axle and Differential Drain and Refill

Axle and Differential Drain and Refill

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL

G03919077
 Oil Suction Gun 303-D104 (D94T-9000-A) or equivalent
MATERIAL

Item Specification
SAE 90 Premium Rear Axle Lubricant C2AZ-19580-F ESW-M2C105-A
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Drain and refill the axle lubricant.
    1. Remove the fill plug.
    2. Using the special tool, remove the axle lubricant through the fill hole.
    3. Fill the axle with the specified type and quantity of lubricant.
    4. Install the fill plug.
      Fig 1: Installing Fill Plug
      G03919078Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals