Front Drive Axle and Differential
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The Dana model super 60 front drive axle features the following:
- A hypoid gear design with the centerline of the pinion set below the centerline of the ring gear
- A conventional differential case
- Full-floating axle shafts
- A cast center section with two steel tubes
- A stamped differential housing cover