LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Removal, Overhaul & Installation) >> Idle Control Systems >> Power Steering Pressure Switch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Raise and support vehicle. Disconnect Power Steering Pressure (PSP) switch connector. Remove PSP switch. To install, reverse removal procedure. Tighten switch to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals