LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Removal, Overhaul & Installation) >> Fuel Systems >> Manifold Absolute Pressure/Barometric Pressure Solenoid >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove Manifold Absolute Pressure (MAP) solenoid connector. Remove 3 MAP solenoid vacuum supply lines. Remove nut and remove MAP solenoid. To install, reverse removal procedure. Tighten MAP solenoid nut. MAP solenoid nut torque specification is not available from manufacturer.

scientia non olet · About LEMON Manuals