LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Removal, Overhaul & Installation) >> Fuel Systems >> Manifold Absolute Pressure/Barometric Pressure Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove Manifold Absolute Pressure (MAP) sensor connector. Remove MAP sensor vacuum supply line and bolts. Remove MAP sensor. To install, reverse removal procedure. Tighten MAP sensor bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals