Removal and Installation
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the engine cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
- Disconnect the radiator overflow hose.
- Disconnect the coolant return hose.
- Remove the 2 bolts and the degas bottle.
- To install, tighten to 10 Nm (89 lb-in).
- Apply High Strength Threadlocker to the bolts threads prior to installation.
- To install, reverse the removal procedure.