LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Thermal Manifold Absolute Pressure Sensor (2.3L) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Disconnect Thermal Manifold Absolute Pressure (TMAP) sensor connector. Remove bolt and lift TMAP sensor out of intake manifold. To install, reverse removal procedure. Tighten TMAP sensor bolt to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals