LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Engine Coolant Temperature Sensor (3.0L & 4.0L) >> Removal & Installation (3.0L)

Removal & Installation (3.0L)

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Partially drain cooling system. See COOLING SYSTEM DRAINING  under COOLING SYSTEMS. Disconnect Engine Coolant Temperature (ECT) sensor connector. Remove ECT sensor. To install, reverse removal procedure. Tighten sensor to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals