LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Cylinder Head Temperature Sensor (2.3L) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Pull back Cylinder Head Temperature (CHT) sensor cover and disconnect connector. See Figure. Remove CHT sensor. To install, reverse removal procedure. Tighten CHT sensor to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals